Product code: FLM00CCS0B0C00 | Product description: FLUMEN 1.0 2W BK9005 10° 2700K 24V 1,5M | Technical decription: Floodlight suitable for outdoor environments (IP66/IP67), with operating temperature range: -20°C / +50°C. To reduce weight and ensure corrosion resistance, the body is made of aluminum. The aluminumbody is protected by polyester epoxy paint to ensure corrosion resistance of 1500 hours in salt spray. The light source consists of a single 2W power Led chip powered at 24V constant voltage with integrated driver. The high luminous flux makes it ideal for marking pedestrian and or illuminating facades and architectural details thanks to the optics with TIR lens. The LED source is recessed for greater visual comfort. Color rendering index CRI > 90. Flumen is equipped with IdroSkudŽ system to protect electronic components from voltage spikes, polarity reversal and water infiltration. There are optionals for anti-glare (honeycomb) and accessory for installation in the ground (stake). The product must be combined with a power supply to ensure its operation. The power supply must be ordered separately. The amount of luminaires that can be connected to a single power supply varies depending on the type of installation. It is up to the installer to verify the possible voltage drop by evaluating the distance between the product and the power supply. | Source type: single chip power LED | CCT: 2700K | CRI: > 90 | MacAdam (SDCM): 2 | Source lumen output (lm): 142 | Luminaire lumen output (lm): 86 | Light emission: Narrow | Beam angle: 10° | Photobiological risk: RG0 | ULR: 0 | BUG Rating: B0 U0 G0 | CIE Flux Code: 97 98 99 100 100 | LED lifetime: L80 B10 50.000h | Efficiency class: This product contains a light source of energy efficiency class (EU2019/2015): F | Width (mm): 55 | Length (mm): 65 | Height (mm): 80 | Weight (g): 325 | IP Rating: IP66 / IP67 | IK rating: IK10 | Type of finishing: Protective primer followed by epoxy and polyester paint | Finishing colour: Black RAL9005 | Body material: Anodized aluminum anticorodal 6082 | External screws material: Stainless steel 316L (A4) | Diffuser material: Extraclear tempered glass | Diffuser thickness (mm): 8 | Class ISO 9223: C5 | Optic type: Technopolymer TIR lens  | Optical optional: None | Maximal working temperature: +50° C | Minimal working temperature: -20° C | Nominal power (W): 2 | Input power type: Costant voltage - 24V | Ballast: Remote | Insulation class: III | Dimmable: Yes | Power cable type: H05RN-F 2x0,75 mm˛ | Power cable length: 1,5 m | Electrical connection: Parallel connection | IdroskudŽ protection: Yes | Inverse polarity protection: Yes | Voltage spikes protection: Yes |